• Home
  • Revere Electric Supply Featured Products

Revere Electric - Featured Products

Linmot: C1250 Series Servo Drives now With CIP Sync™

Do you want a high-speed linear actuator that can beprogrammed with Rockwell Automation motion instructions and synchronized withstandard Rockwell Automation servo motors? Well look no further than the LinMotC1250-CM drive.

In cooperation with Rockwell Automation, LinMot has addedCIP Sync™ to the EtherNet/IP interface to its C1250 series servo drives. Thisallows LinMot linear motors, the controller, and the entire axis system to besynchronized easily and accurately. In addition to the data packets sent by thecontroller, time information is now also recorded and processed by the servodrive.

CIP Sync™ enables very precise synchronization accuracybetween two or more LinMot and Rockwell servo axes in one system. CIP Sync™ provides the increased control coordination required for servo applicationswhere absolute time synchronization is critical to achieve real-timesynchronization between distributed intelligent servo axes.

For easy integration, LinMot provides the user withpre-programmed instructions (AOI). These instructions pre-define thecomposition of the data packet in terms of parameter channel, timestamp,position, velocity and acceleration. This guarantees fast and uncomplicatedcommissioning by the user. The CIP Sync™ extension can be found on the LinMotC1250 series servo drives with the -CM suffix.

LinMot C1250

Spectrum Controls: Universally a Better way to Gateway!

Any protocol to any protocol, any port to any port simultaneously.

Spectrum Controls Universal Gateway makes it easier to integrate any device into your industrial control system. When modernizing networks, integrating new machines or putting your legacy devices back to good use, having the right gateway to address your communication needs makes all the difference. The new Universal Industrial Gateway raises the bar, providing a single solution for connecting multiple devices, across multiple protocols,simultaneously.

Being dubbed "A Better Way to Gateway," the Universal Gateway provides the flexibility to scale to any need with nine built-in protocols: EtherNet/IP, EtherNet/IP-PCCC, Modbus TCP, Modbus RTU, Modbus ASCII,DF1-PCCC, DF1-CIP, PPI, S7comm. Including the Ethernet port and multiple serial ports, all of which are fully configurable, it"s easy to see how the Universal Gateway provides the functionality of multiple gateways for the price of one.

Setup is straight forward using a web browser, meaning no messy software to install or maintain and because it's a single solution, the configuration is consistent for any protocol. The Universal Gateway is also firmware upgradable from the field, with more protocols being developed for delivery in a future release. Whether you are an engineer, machine builder,system integrator or maintenance technician, the Universal Gateway is cost-effective and makes communications easy.

Spectrum Controls Gateway

Now Representing Codian Robotics!

Revere Electric is excited to announce our new partnership with Codian Robotics. Codian robotics develops Pick and Place robots for industrial applications. They are ideal for high speed, high payload, hygienic environments; such as, food & beverage, packaging,pharmaceutical, automotive, and consumer electronics.

Codian Robotics focuses on the niche market of Delta robots and offers the widest range of Delta robots in the world! Their differentiating benefit is that they are built without an operating system, which makes them compatible on almost every common machine control system.

Thinking about incorporating robots on your next machine? Revere's robotics team can help you with every step in the robot application process - from design and build to final output; our expertise ensures increased efficiencies and productivity of your machine.

For more information, contact your Revere Account Manager to learn what Codian Robotics can do for your next pick and place application.

Demonstration Video:

This Codian D2-1000 robot features Carbon Fiber arms. In this application, there is an added motor to the tooling plate to allow an extra degree of rotation. The robot is picking up sealed glasses of milk and transferring them for packaging. Codian Robots are an open architecture and can use any control system that has a Kinematics Model.

Codian Robotics D2

Holophane: Phuzion Hi-Bay

The Phuzion™ LED luminaire takes high-bay lighting to new levels of lumen output and temperature tolerance. Combining the latest in LED technology with the legendary illuminating dynamics of Holophane's prismatic borosilicate glass, the Phuzion LED high bay delivers unparalleled performance and reliability.

  • Lumen packages range from 12,000 to 60,000 lumens in a single luminaire
  • Up to 50% energy savings over traditional light sources
  • Ambient Range: -40°F (-40°C) to 149°F (65°C)
  • IP64 Rated
  • Optional integration with Xpoint Wireless for enhanced energy savings
  • Available in tandem (PHZT), remote (RPHZ) or crane mount (PHZC)

HoloPhane Hi Bay

LinMot Introduces the NEW E Guide

LinMot linear guides are compact guide units for linear motors. The guides are used to guide the load, to support external forces,torques, and bending moments, and simultaneously act as anti-rotation devices.They provide high-precision guidance and allow the load to be dynamically and precisely positioned.

The E-Guide is LinMot's newest version of a guided linear motor. The E-Guide features a second set of linear bearings (previous F guides only have one set). This extra set of bearings gives you added resistance to "twisting."

For example, if you have something hanging below the unit and it is moving back and forth, it would act like a pendulum. If you incorporate an E-Guide , you will have the extra bearings needed to resist the swinging motion, which allows the unit to go faster and remain precise.

LinMot's E-Guide was featured at Rockwell Automation's 2018 Automation Fair. See how it works in the video below:

LinMot E Guide

Panduit Verisafe: The Safe Way to Verify the Absence of Voltage

The VeriSafe™ Absence of Voltage Tester product from Panduit is the latest in groundbreaking electrical safety tools, designed to minimize risk of electrical hazards in about ten seconds. This 2018 NFPA 70E compliant, SIL 3 rated product can determine voltage status before equipment is accessed with just a push of a button, keeping your people and assets safe.

Fluke 3561 VC Vibration Sensor

Fluke's 3561 VC Vibration Sensor takes vibration and temperature measurements remotely every 90 seconds and will send you graded security alarms on your smart device or computer within seconds of an abnormality. Remote monitoring decreases routes and improves uptime by giving you actionable insights.

Learn more

Fluke 3561 Vibration Sensor

Philips InstantFit LED Lamps

Philips InstantFit LED lamps make the transition to LED from CFL lamps as simple as replacing a lamp. With both vertical and horizontal options and a wide array of color temperatures, the InstantFit LED lamps can quickly and effectively replace compact fluorescent lamps. The horizontal version includes a rotatable end cap to ensure the light is correctly aimed.

Electri-Flex Stainless Steel Flexible Conduit

Stainless steel conduit is ideal for corrosive environments,such as chemical processing, water treatment plants, oil & gas refineries,food processing, wastewater treatment, ship building, steel mills, powerplants, transportation, utilities, and marine applications. Specialty product features include, but are not limited to: Food Grade/NSF Certified, Industrial Grade, Halogen-Free, Low Fire Hazard, Extreme High/Low Temperature.

Its benefits include:

  • Excellent Corrosion-Resistance
  • Jacketed Conduits are Liquidtight
  • Non-Magnetic
  • Higher Crush Strength vs. Standard Steel Core

AMCI Has Added Larger Motor Sizes to Their SMD Series

Advanced Micro Controls Inc. (AMCI), has added larger motor sizes to their lineup of PLC-based SMD Series "all-in-one" stepper motor + drive + controllers in order to satisfy a wide variety of applications with varying torque requirements. The SMD Series offers many sophisticated features at a low price point, and integration eliminates the need to purchase multiple components. AMCI's SMD Series integrated solutions are ideal for new machinery and retrofits when looking to automate set up axes.

The SMD Series integrated stepper motorsprovide a complete solution, offering a wide variety of options for exceptional performance across a range of applications. With the addition of NEMA size 34 packages, options now include NEMA size 23, NEMA size 24, and NEMA size 34,with torque ranging from 130 oz-in (0.9 N-m) to 850 oz-in (6.0 N-m).

Features of the SMD Series include built-in network connectivity, EtherNet/IP, Modbus-TCP, or Profibus, built-in Ethernet switch, SynchroStep™ technology, optional integrated encoder (incremental or multi-turn absolute), IP67 rated versions, gearboxes, and compatible cord sets.

Kinetix 5700 Servo Drive Delivers Simplicity For Leaner Machines

Used in place of multiple servo drives, the Allen-Bradley® Kinetix® 5700 EtherNet/IP™ servo drive helps machine builders reduce cabinet space by up to 70% and wiring requirements by as much as 60%.Jim Grosskreuz, Rockwell Automation, shows how this platform can help machine builders develop leaner machines, and get them to market faster.

Lutze, Inc. Explains Why You Should Use VFD Cable

LUTZE DRIVEFLEX® cables are safer and more efficient compared with traditional PVC/Nylon power tray cables or THHN wires in conduit. DRIVEFLEX® XLPE insulation has very low capacitance, high impedance and high voltage breakthrough resistance. XLPE insulation is the superior choice for VFD applications with pulse width modulation (PWM) to cope with high voltage spikes and power distortions from the VFD output. Shielded VFD cables can help to mitigate electrical noise, thus decreasing shaft voltage and motor bearing failures.

Introducing the NEW Apex Rack and Pinion

Apex Dynamics USA is proud to announce the official, highly anticipated, release of the high precision rack and pinion line. Apex Precision Rack and Pinion is the ideal selection for your automation application. Rack and Pinion systems can replace ball screw systems with longer travel capability without adding inertia and offer higher force capability. Linear motors can also be replaced with rack and pinion to provide lower cost and similar performance in many applications. Highly accurate systems for machine tools and measurement systems can be engineered with rack and pinion using electrical preload designs.

Do you have an application that may require Rack and Pinion? Download the Rack and Pinion Application Questionnaireto start designing your system.

We Are an Authorized Distributor of Toshiba Motors

Revere is proud to announce that we are now a stocking distributor (up to 30 HP) forToshiba motors. Toshiba International Corporation has developed a proud tradition of producing some of the most reliable, robust motors in the market. Toshiba produces a wide range of low and medium voltage motors that are built to withstand virtually any industry and application,setting new standards in extreme duty performance and durability.From general purpose to explosion proof, Toshiba has a motor for almost every application

For a complete listing of our motor offerings, please download our "Motors at A Glance" brochure.

Learn more about Toshiba motors on their website.

Signs, Labels & Identification with Panduit Solutions

Every detail matters in a potentially hazardous workplace. Don't minimize the need for adequate signs, labels, and identification. Use clear and quickly understood signs from Panduit to mark routes, alarms, equipment, and power sources. Place labels on arc flash and chemical sources, employees' locks, and network systems hardware. Identify regulatory standards, cables and wires, patch panels, faceplates, circuit boards, and data centers.

Thin Client Management and Location-Based Mobility

ThinManager provides software solutions for automation networks that enable secure, centralized configuration and deployment of applications and content to every PC, thin client, mobile device and user.

ThinManager® increases safety and security through powerful visualization and authentication features while reducing maintenance and downtime by simplifying the management of all devices and users.

Users can also go mobile with ThinManager's built-in mobility solution, Relevance® - the only location-based mobile management platform that allows applications and content to be securely delivered to specific locations within a facility and nowhere else.

Increase productivity, visualization, mobility and security from one easy-to-use, centralized and scalable management platform.

Littelfuse: MP8000 Series - Bluetooth Overload Relay

The MP8000 are advanced motor protection electronic overload relays, fully programmable via Bluetooth ® using an iPhone ® or Android™ smartphone or tablet with the Littelfuse App. It is easy to use and arc-flash safety is increased because the app allows settings to be modified and real-time operational information viewed. Viewing operational information and faults on the app does not require the user to open the control panel.

Hubbell Wiring Devices:Circuit-Lock® 30A Disconnects with LED Indicators

Hubbell's new 30A Circuit-Lock Disconnect with integralphase indication LEDs redefines the benchmark forsafety by providing insight into the enclosure while inuse. Six highly visible LEDs communicate the electrical status of the switch byphase.This voltage detection feature significantlyimproves existing safety and maintenance procedures byvisually providing personnel critical information prior to r emoving the enclosure cover; e.g. a welded contact ordropped phase.

Veolia: New PAK Recycling and Disposal Catalog Available

Veolia just released a new catalog. This catalog not only includes all their award-winning RecyclePak® products for recycling of lamps, ballasts, batteries, mercury waste, and electronics, but also includes information on proper disposal for aerosol cans, smoke detectors, tritium exit signs, regulated medical waste as well as, environmental supplies, including poly pails, boxes, spill kits, and much more.

Hubbell Wiring Devices: New NEMA Configurations for Twist-Lock Devices for Data Centers

Hubbell just announced the addition of 2 new NEMA configurations to the Twist-Lock® line!

These new NEMA configurations will support electrical connections in data centers that are starting to employ higher power at the cabinet level. Most data centers are fed with 277/480V AC, 3 phase power, which then needs to be stepped down for cabinet PDU's which operate between 100V AC to 240V AC single phase. This is accomplished by stepping down from 277V AC through isolated transformers before it can be used.

By way of 415V AC, 3 phase power, data centers can now realize greater efficiency by reducing the number of power transformers in their facility. This change in power delivery is estimated to increase efficiency by approximately 2%. In addition, cabinets are now able to accept higher voltages such as 240V AC.

With these new NEMA configurations, electrical connectivity can be possible with Twist-Lock® devices.

Philips Lighting: Light To Go Products

Introducing Philip's new line up of lighting essentials - quick to order, easy on your wallet and simple to use. And, all Light to go products are available in 48 hours or less!

The Philips Light to go lineup allows you to choose dependable, sturdy and great-looking products that will last, but won't blow your budget, whether it be a commercial, residential or outdoor lighting project.

Philips Light-To-Go Web Page

Philips Lighting

Revere Now a Distributor of Lutze Cables

LUTZE is the ultimate partner in industrial cable and connectivity products for industrial automation. Their rugged, industrial cables are designed for harsh environments and provide the right solution for your power, control or data applications.

LUTZE specializes in flexible and continuous flexing industrial control, power and network cables, such as LUTZE Silflex®, LUTZE Superflex®, LUTZE MOTIONFLEX™ and DRIVEFLEX® VFD cables, for various applications in factory automation.

Lutze Cables

NovaMax EC Permanent Magnet Motor

Have you ever wanted to get more for less? How about better performance and longer motor life, while lowering your electric bill?

NovaMAX™ motor's innovative conical rotor/stator geometry produces rare-earth-like motor performance using inexpensive, readily available, ferrite magnets. It is a whole new class of electric motor that provides the performance of a permanent magnet motor at a cost more similar to a premium induction motor.

Here is what we like about the NovaMax:

  1. The design of the interior permanent magnets (IPM) further focus flux for improved sensorless motor control.
  2. Due to higher efficiency the motor runs cooler, extending motor life .
  3. Using permanent magnets produces a magnetic field in the rotor, which inherently saves energy when compared with the electrically induced magnetic field in an induction motor rotor.
  4. The motor maintains the standard NEMA® mounting and shaft dimensions

NovaMax EC Permanent Magnet Motor

Wittenstein - The New Alpha Value Line Gearbox Series

The NEW Alpha Value Line is universally suitable and represents the most economical solution for driving any axis in virtually any industry.

Here is what we like about the Value Line:

  1. Modular configuration of the interfaces to the motor and the application. You can choose between several different clamping hub diameters, input stages and design and mounting variants.
  2. Safe and secure motor mounting is possible in a single step.
  3. More than 95% efficiency at full load.
  4. Torsional backlash in the region of <= 8 arcminutes.
  5. Alpha gearboxes are distinguished by extremely quiet running and synchronization accuracy.
  6. The gearboxes are suitable for both cyclic and continuous operation.
  7. The Alpha Value Line lets you select the mechanical interface flexibly according to your individual requirements.
  8. Thanks to the special lubrication concept, you can install the gearboxes vertically, horizontally or with the output facing upwards or downwards.
  9. new design options - For example, in linear applications with a rack and pinion or a timing belt pulley.

The HIGH TORQUE version provides extremely high power density.

Wittenstein Gearbox


The Only Automatic Permanently Installed "True Dielectric" Insulation Resistance Testers and Monitors with 500-5000 VDC Test Outputs

MegAlert manufactures the MotorGuard and GenGuard patented testing and protection systems designed to detect insulation breakdown in critical motors and generators. The system senses when the motor or generator is offline and then performs a continuous dielectric test on the winding insulation until the equipment is started again.

Here is what we like about MegAlert:

  1. Safety - MegAlert is committed to making the workplace safer by bringing you devices that provide "hands-off" testing, which can prevent disastrous accidents from occurring and even saves lives.
  2. MegAlert gives you a highly reliable indicator of a motor or generator's probability for failure on startup is crucial, allowing you to reduce unscheduled downtime and save on potentially disastrous repair costs.
  3. A safer and more reliable work environment comes with the added benefit of cost savings in crucial areas of operation. with less downtime and fewer unscheduled repairs, as well as an increase in personnel safety, you can be confident MegAlert will benefit you and your operation.

MegAlert MotorGuardGenGuard

Bussmann 2018 Fuseology Handbook

Bussmann just announced the release of their 2018 Fuseology handbook, a 52-page technical guide that covers circuit protection basics based on the 2017 NEC ® , and provides insight into what can make an electrical system safer. The handbook demystifies topics like fuse operation and construction, ratings, performance characteristics, and fuse types and classes, along with their Code requirements.

Download your copy today!

Bussmann 2018 Fuseology Handbook

eWON Flexy 205 is Now Available!

The eWON Flexy 205 is the new advanced internet data gateway that allows Machine Builders to monitor and collect vital KPIs for analysis and predictive maintenance. With data logging, alarming, built-in web interface, scripting and enhanced internet connectivity, the Flexy 205 is a modular Internet Gateway for your IoT deployment. It also supports VPN Remote Access for easy troubleshooting of your distant industrial equipment.

eWON Flexy 205

Allen Bradley PowerFlex 525 AC Drive

The new Allen-Bradley® PowerFlex® 525 AC drive from Rockwell Automation delivers an innovative modular design that is remarkably versatile and can accommodate systems ranging from standalone machines to simple system integration. These next generation compact drives come with embedded EtherNet/IP™ communications, safety, USB configuration and a high ambient operating temperature, as well as a wide range of motor control ideal for a vast array of applications.

PowerFlex 525

Pentair Hoffman Angled Trough

The new Hoffman Angled Trough is an enclosure that cuts total installation time by 80%. It eliminates the need for costly 90-degree conduit bends and offers flexibility for wire distribution, making it a time and cost saving solution.

Electri-Flex Announces Launch of New Stainless Steel Flexible Conduits

Electri-Flex Company announces the launch of a new line of Stainless Steel Flexible Conduits. The use of stainless steel for the core of a liquidtight flexible conduit provides exceptional resistance to corrosive atmospheres such as chemical processing, water treatment plants and other specialty applications where standard plated steel may not be adequate. The inner stainless steel core provides not only corrosion-resistance, but also offers additional high mechanical strength.

Direct Connect Made Easy: The Panduit TX6A™ Field Term Plug

While the Panduit TX6A Field Term Plug (Figure 3) works within any architecture, it is ideally suited for direct connect applications which depend upon a high-performance plug that can be terminated on site.

The plug is ideal for connecting network devices such as wireless access points, LED lighting, security cameras, sensors, building access units, display panels, and others.

Mersen - New & Improved Surge-Trap® STP Series

Mersen, an industry pioneer in surge protection technology, has developed a world-class suite of surge protective devices for your entire facility. Surge-Trap® SPDs are designed to UL1449 4th Edition standards and feature Mersen's industry leading patented TPMOV® technology inside. Providing advanced overvoltage protection to meet today's toughest requirements, you can rely on Mersen's Surge-Trap® SPDs for proven and safe facility-wide protection.

Eaton's New Breaker Integrated Transformer

Eaton's Breaker Integrated Transformers (BIT) integrates a traditionally separate Molded Case Circuit Breaker (MCCB) and a low-voltage dry-type distribution transformer. Factory-assembled and fully tested, BIT helps reduce arc-flash hazard, footprint and overall cost of the electrical distribution system.


  • Reduced Project Costs
  • Minimized Footprint
  • NEMA Type 1 enclosure
  • Simplified Installation
  • Enhanced Power System Flexibility
  • Reduced Arc Flash hazard
  • 2-inch minimum clearance from enclosure walls to reduce overall footprint
  • Includes Bonding Ground Bar as standard in compliance with NEC 450.10 (A)

If you have a need that does not meet the standard specifications, Eaton's Transformer Flex Center provides the ability to engineer or modify solutions to solve your most critical application challenges.

Flex Essentials Series 4.0 LED High Bay

The newest generation of the Essentials Series LED fixtures delivers superior performance, quality and versatility in low bay and high bay applications.

Designed with an even higher efficacy and a best-in-class thermalmanagement for ambient temperatures up to 65°C, the Essentials Series 4.0 provides the highest reliability and best lumen maintenance in the industry while providing the lowest TCO.

Featuring rotatable outer modules to optimize the light distribution and provide the highest flexibility to lighting designers, installers and end-users.

Mersen Surge Protection Solutions

Allen-Bradley Guardmaster Lifeline 5 Cable-Pull Switches

Rockwell Automation introduces the Allen-Bradley® Guardmaster® Lifeline™ 5 safety cable-pull switch. The new patented Lifeline 5 is a microprocessor-based solution that brings advanced features and diagnostics that help enhance safety while improving productivity.

The Lifeline 5 offers features and functions that simplify setup and allow for more efficient maintenance and troubleshooting, making it the most advanced switch on the market today. And it does all this while performing at the highest safety ratings (TÜV certified to Ple, Cat 4, SIL 3), even when connected in series.

Check out the product profile for more information.

The LinMot Advantage

LinMot, a Rockwell Encompass Partner, manufactures a complete line of Linear Motors, Guided Actuators, Servo Drives, and MagSpring constant force magnetic springs for industrial applications. As a Rockwell encompass partner, LinMot products have AOIs (add on instructions) and EDS (electronic data sheet) files for seamless integration for the Logix processors.

If you have applications that call for extremely high speeds, long life, complete controllability, very long strokes, and peak forces up to 600 pounds, look no further than LinMot.

Check out their website for their full product online:


Hoffman Extended Warranties

Hoffman thermal management products provide industry leading quality and reliability. Hoffman aftermarket service and support are unmatched in responsiveness and resolution. Now you can receive that same level of support and protect yourinvestment for up to 5 years total with Hoffman's Extended Warranty plans.

Mighty Small Arc-Flash Relay - AF0100

Littelfuse AF0100 Series arc-flash relay is a cost-effective solution that reduces arc-fault damage by detecting the light from an arc flash and rapidly tripping. Two remote light sensors can be connected to one relay and multiple AF0100 and/or AF0500 relays can be connected to monitor additional sensors, providing complete coverage for a wide range of applications.

NEW GraceSense HSM

Grace Engineered Products, Inc. is pleased to announce the new GraceSense™ Hot Spot Monitor (HSM); a continuous temperature monitoring device intended for locations that are difficult and hazardous to access.

The HSM utilizes patented fiber optic technology to provide constant temperature data from nine or eighteen independent sources (depending on the HSM model). The optical probes can be mounted onto electrical busbars, splices, disconnects, cable connections, or any source of heat.

The HSM provides a unique combination of non-conductive fiber optic technology with advanced algorithms. Simply attach the fiber probes to a ring-style connector that securely bolts onto heat surfaces such as busbars while the other end connects to the HSM. Potential Failure Points (PFPs) may include inaccessible equipment and blind spots to infrared (IR) thermography.

The most obvious benefits of the HSM over IR come from the real-time status updates of temperature data at PFPs that are completely inaccessible to IR scanning. In addition, the successfully proven measurement accuracy of the probes is not subject to operator error, as can be the case with IR.

Panduit's NEW Terminal Block Markers

Panduit terminal block markers simplify control panel identification by enabling the use of a single, cost-effective printer for all labels, including terminal block markers, heat shrink, self-laminating, raised panel, arc flash labeling, and safety sign printing.

Designed from a unique flexible polymer material that can be printed on-demand from a standard TDP43ME using a standard resin ribbon, Panduit terminal block markers remove the need for multiple printing system; saving shop space, time, and wasted costs.

Bussmann Compact High Speed Fuse

Eaton answers the call for compact drives, power conversion and UPS equipment with our new Bussmann series compact high speed fuses.

Our 50-400 amp fuses use up to 48% less enclosure space when compared with traditional high speed, round body fuses. What's more, the innovative design allows for a significantly smaller package without compromising heat rise performance.

With the most compact high speed fuses in the industry, rated at 500Vac/dc, we help you achieve smaller overall equipment designs.

Hubbell USB Charging Receptacles

Type C - Type A&C - Type A

Hubbell USB Chargers are available in the new Type-C port, a combination unit with Type A and C, and the legacy Type A, all with more power. The increase in power to a 5 Amp 5 Volt USB port adds capacity so that there is always ample current to support multiple device charging. Portable mobile manufacturers recently announced products using the faster Type-C ports. More phones, tablets and other electronic devices are expected to use this new standard.

The USB Charger delivers USB power eliminating the need for adapters, while maintaining electrical outlets for higher current requirements. The new USB standard Type-C port supports faster mobile device charging. Hubbell offers more charging options with Type-C and Type A USB configurations.

PowerFlex 755T Drive Solutions

The new Allen-Bradley PowerFlex 755T products expand the proven portfolio of the PowerFlex 753 and 755 AC drives. These powerful new additions offer precise motor control along with solutions for regeneration, low harmonics and flexible drive system configurations.

The PowerFlex 755T products use TotalFORCE technology, our patented field oriented control for accurate torque control. With TotalFORCE, the PowerFlex 755T products deliver fast, precise, responsive control of position, velocity and torque.

Designed and built using a modular approach, the PowerFlex 755T products allow you to select the ratings and capabilities your application needs. The modular construction also offers the added advantage of fast and easy parts replacement and simplified management of a common set of spares.

  • PowerFlex 755TL Drive- Provides low AC input harmonics and power factor correction through the use of active front end technology.
  • PowerFlex 755TR Drive - Provides an energy efficient solution that uses regenerative active front end technology to deliver energy back to the incoming supply. This drive also provides low AC input harmonics and power factor correction.
  • PowerFlex 755TM Drive System - Select from a series of pre-designed configurations for regenerative common bus supplies and common bus inverters to optimize your system design and power consumption.

Motion Solutions by Macron Dynamics, Inc.

Macron Dynamics is an efficient manufacturer of both standard motion components like MacSTANDARD belt driven actuators and screw actuators, as well as, engineered automation solutions including MacBUILT multi-axis automation systems and linear actuators.

Macron Actuators offer horizontal and vertical motion with travel up to 500 feet, speeds up to 600 in/sec., and they can accurately handle loads up to 10,000 lbs.

Macron also has complete packages for any type of linear motion - from simple single axis type motion to complex multi axis configurations for wide range of applications.

And if you are looking for linear robots, Macron has a wide selection of linear robotic solutions including H-Bots, T-Bots, Gantries, and Cartesian Robots.

Learn more about Macron by visiting them online @ www.macrondynamics.com .

Allen-Bradley Kinetix VPC Continuous Duty Servo Motor

The newly released Allen Bradley Kinetiix® VPC Continuous Duty Servo Motor uses interior permanent magnet technology to provide more efficiency at higher speeds in continuous duty applications. Design features, such as the attached fan kit and option for single cable power and feedback, both enhance machine performance and increase ease of use.

Our common Logix platform allows you to program the Kinetix VPC along with the Kinetix 5700 Servo Drive and the rest of your control system in the Studio 5000® design environment.

Features and Benefits include: Increased Power ratings (up to 30kw), Increased Continuous Torque, Higher Speed, Single Cable, and IE4 efficiency.

This motor would be perfect for Converting, Printing, and Web Handling.

Panduit BlackFin Installation Tools

Panduit features NEW battery powered crimping tools - that lead the industry in safety and reliability.

Termination Tools:

  • Three NEW tools designed for quicker termination
  • Meets OSHA mandated electrical and mechanical product safety requirements
  • Lightweight ergonomic design provides maximum productivity and ease of use in continuous workflow operation

Power Connector Tools:

  • Seven NEW battery powered crimping tools
  • One push-button operation
  • Dieless tool available
  • Crimp - Cut - Punch all in one tool options

LinMot's P04 Linear Motor

LinMot presents the newly developed model P04 linear motor. This motor has all the benefits of the familiar tubular linear motor and the additional advantage of an integrated linear guidance. The P04-actuator can be equipped with mechanical accessories which are known from pneumatics. Thus, the replacement of pneumatic is even easier!

Safety Automation Builder

Safety Automation Builder is a FREE software tool to help simplify machine safety design and validation, reducing time and costs. Integration with RASWin Risk Assessment Software* provides you with consistent, reliable, documented management of the Functional Safety Lifecycle.

Safety Automation Builder streamlines safety system design, helping improve compliance and reduce costs by guiding you through the development of your safety system including safety system layout, product selection, and safety analysis to help you meet machinery safety Performance Level (PL) requirements as outlined by global standard (EN) ISO 13849-1.

RASWin software helps you manage your progression through the functional safety lifecycle, organizing information from each step of the process and machinery validation. RASWin links the steps of the safety lifecycle to avoid systematic failures, including safety function specifications, Performance Level requirements (PLr) assignment and PLr calculation, safety circuit validation, and documentation.

  • RASWin software requires an annual subscription fee.

Learn everything you need to know about Safety Automation Builder now.

View PDF

Hubbell Circuit-Lock 200A Disconnect Switches

Hubbell's200A Disconnect Switches are the latest addition to the Circuit-Lock family of switched enclosures. The enclosures are designed to withstand harsh environments with exposure to water, chemicals, oils and frequent washdowns.

Available in non-metallic or stainless steel, the enclosures are UL Listed Type 4X and 12. The switch accommodates up to two auxiliary contacts for control circuit applications. The high visibility red handle can be locked in the OFF position for compliance with OSHA Lockout/tagout requirements.

View PDF

Rockwell Automation 1606-XLB Basic Power Supply

Rockwell Automation's Bulletin 1606-XLB Basic Switched Mode Power Supplies are available in 24V DC 5 A and 10 A sizes. These power supplies are cost-effective, provide efficiency up to 95.2%, and are rated for long service life.

Robust enough for demanding applications, these convection cooled units can operate from -10 C° (some units -25 °C) up to 70 °C. Typically, power derating is only required above 55 °C . The XLB family is easy to mount on any standard DIN rail and features large-sized terminals for easy wiring. The 240 W version is only 49 mm wide, an industry leading space saving benefit of XLB.

The new 1606-XLB product family is cost-effective without compromising reliability, efficiency and ease of application.

View PDF

Crouse Hinds EBMX Clamped Enclosures

The clamped EBMX from Eaton's Crouse-Hinds. The world's only NEMA 7 classified enclosure to utilize clamping technology.

Save time and money

  • Reduces installation and maintenance costs
  • Simple clamp cover design opens in seconds

Error-proof installation

  • All surface clamps apply even pressure across the flame path
  • No chance of missing bolts

Multi-use and highly customizable

  • Designed for use as starter, combo starter, disconnect switch or breaker
  • 65kAIC at 480V certified enclosure rating
  • Up to 6 cover operators
  • Factory wired
  • Thermal magnetic and electronic trip breakers
  • Bi-metallic and electronic overload starters

Patented safety

  • 11 patents associated with all-clamp technology

Check out the Video!

View PDF

Pauluhn™ Apex linear LED luminaries

Pauluhn Apex LED luminaires are engineered to provide maintenance-free performance, while delivering long life and high lumen output for food and beverage applications.

Featuring the industry's broadest range of LED luminaires for harsh, hazardous and industrial environments, Eaton's Crouse-Hinds can deliver a lighting solution that performs reliably in even the worst operating conditions. All the while reducing your energy, maintenance and manpower costs.

View PDF

Hoffman Proline G2


PROLINE G2 is designed to bear the advanced loads and harsh environments of industrial applications, while making the electrical enclosure easier to use and faster to populate.

PROLINE G2 raises the level of innovation, quality and value in modular electrical enclosures.

  • Superior performance under load - designed and tested for industrial environments
  • Maximized usable space - more room for your electronics; same footprint
  • Easier and faster to load electronics - save time and money
  • Built to last - durable materials and quality components
  • Expanded standard size options - quickly get what you want with over 150 standard frame options and over 350 standard industrial package options

Proline G2 Modular Configurator

View PDF

Rockwell Automation Virtual Training

Virtual training provides an opportunity for workers to limit their time away from work for training while providing a valuable interactive experience. It can be ideal when workers can not travel for an extended period of time, when training budgets are limited, or if workers simply want to refresh their training.

Rockwell Automation's virtual classrooms are live, instructor-led courses that are designed to give students web-delivered, interactive training experiences through WebEx technology to provide customers with all the benefits of classroom instruction, straight from your desktop.

Courses can include various learning activities and features:

  • Polls and surveys
  • Group and private chat
  • Whiteboard
  • Desktop sharing
  • Passing control to students
  • Break-out rooms for small-group discussion
  • Check knowledge through testing

Check Out the Virtual Classroom Courses Available

Enroll in a Rockwell Automation Virtual Training Class

View PDF

Allen-Bradley Guardmaster 442G Multifunctional Access Box (MAB)

The Allen-Bradley Guardmaster 442G Multifunctional Access Box (MAB) is an integrated access control and guard locking device, which provides a complete safeguarding solution for full body access applications. The upcoming product release includes CIP Safety over EtherNet/IP.

View PDF

HMS Anybus Wireless Bolt - Ethernet

Anybus Wireless Bolt enables you to connect industri al machines and devices to a wireless network. It is attached onto a cabinet or a machine to enable wireless access over Bluetooth ® , Bluetooth Low Energy ® or WLAN (WiFi).

On the wired side, the Anybus Wireless Bolt communicates over Industrial Ethernet, supporting protocols such as BACnet/IP, PROFINET, EtherNet/IP, Modbus TCP as well as TCP/IP and UDP.


Anybus Wireless Bolt gives you direct access to configure or troubleshoot your machinery. With a range of 100 meters you can access the internal web pages via a laptop, tablet or smartphone. BYOD (Bring Your Own Device) means that you no longer need an expensive HMI. A machine operator or technician does not need to be physically located at the machine to gain access.


With Anybus Wireless Bolt you get an All-in-one package featuring, connector, communication processor and integrated antenna in the same unit, with an exterior IP67 protection class. Regardless of communication method you select, you have the same connector (2x9p Plug Connector) for both power and communication.

View PDF

Staubli Robots

Providing robotics solutions worldwide

Regardless of industry or application, the requirements of automation are universal. Across our extensive range of pr oducts, Stäubli industrial robot arms deliver distinct technical advantages: compact size, broad work envelopes, high-speed, precision, resistance to all types of environments and, above all, the flexibility to adapt to the greatest number of tasks.

An innovative approach to your every need
Staubli provides the most comprehensive product line with unmatched quality and reliability.

A complete range of robots

  • SCARA 4-axis robots
  • 6-axis robots
  • Specialized robots (painting, cleanroom, plastics, machine-tools, etc.)

A single PC-based platform

  • A single family of CS8 controllers to control the entire range
  • Choice of programming: VAL robotics language, or PLC-IEC61131 languages (Ladder, SFC, FBD, ST, IL)
  • A PC software package, Staubli Robotics Studio, offering user-friendliness and integration within the Windows® environment.

Unrivaled quality of service

  • Technical sales support and integrator partnerships
  • Application and programming support
  • Training



View PDF

The PowerFlex 523

Your Basic Application Easy to Use Allen Bradley PowerFlex Drive!

Great for those simple pump, fan, and conveyor applications!

  • Inexpensive
  • Easy to Configure and Install!
  • Great solution for simple energy Savings!
  • Available Horse Power Ranges 1/4 -30

There are several ways to quickly and easily configure PowerFlex 523 AC drives. From the integral HIM that features QuickView ™ scrolling text, to Connected Components Workbench ™ software or the Studio 5000 Logix Designer ™ application; these tools are designed to help you reduce development time so you can deliver machines faster and more efficiently.

Connected Components Workbench software can help minimize your machine design and development time and is ideal for standalone applications. Application-specific parameter tools such AppView and CustomView configuration can help streamline drive setup. You can also upload and download configurations over a USB connection and configure drives over EtherNet/IP, DeviceNet or other open industrial networks.


Blog: Energy Savings with Pumps and Fans

Starter Replacement Guide

Powerflex 523 Product Profile

Increase Capacity with Scalable Controller Solution

ControlLogix® 5580 controllers provide increased performance, capacity, productivity, and security to help meet the growing demands of smart machines and equipment for manufacturing.

These controllers use the Studio 5000 Automation Engineering & Design Environment application as a common design environment and Integrated Motion over EtherNet/IP for high-speed motion applications. Ideal for applications requiring high-performance communications, I/O, and motion control for up to 2 56 axes, these controllers provide increased capacity of up to 45%.

View PDF

Philip's LED Post Top HID Replacement Lamp

Philips LED High lumen post top lamp makes it easy to upgrade to long lasting, energy saving LED technology without sacrificing your site's unique outdoor character. Save yourself the hassle of replacing your entire luminaire, and retrofit with the Philips LED High Lumen lamp.


  • Saves 70% energy savings vs. 100W HPS systems, or 58% energy savings vs. 70W HPS systems
  • Long life lowers maintenance costs by reducing re-lamp frequency
  • Upgrade your light quality with beautiful, white light
  • Worry-free compatibility with the ballast bypass technology

Hoffman SpectraCool Compact Narrow Series Air Conditioner Line Extension

Hoffman is excited to announce the expansion of the SPECTRACOOL Air Conditioner family! The new N16 and N21 indoor air conditioners were created for customers needing compact units with active condensate management features and UL Listed protection up to and including Type 4X.

Product Features

  • Standard stocked models

  • UL Listed (most models): Type 12, 3R, 4 and 4X (optional)

  • Malfunction switch

  • Power off relay for door switch

  • Chevron-style cover pattern

  • Active condensate management system

View PDF

Hubbell Extra Duty While in Use Covers

Hubbell Wiring Device-Kellems has officially launched a new line of EXTRA DUTY®While-In-Use Covers. This family of NEMA 3R Rated While-in-Use Covers offers weather protection for devices when they are being used in damp or wet locations. They meet the current 2014 NEC®article 406.9.

Constructed out of heavy duty die-cast metal and high-impact polycarbonate construction, EXTRA DUTY®While-In-Use Covers are ideal for use in industrial, commercial, and residential outdoor applications such as on exterior walls, pools, decks and exterior lighting.

Hubbell's EXTRA DUTY®While-In-Use Metallic Covers offer the following features :

    • Each box contains three or six plates to make a variety of configurations
      (8 or 55)

  • Patented keyhole mounting system, allowing the cover to be installed in under a minute

  • Lockable tab for OSHA compliance

  • .35" Hasp size

  • NEMA 3R rating

View PDF

Bussman Power Distribution Fuse Blocks

Eaton has developed a portfolio of Bussmann® series fuse blocks with power distribution capability. The patented design simplifies panel layout, reduces installation labor costs, uses less space, reduces the number of panel components and lowers the operating temperature of the enclosure. These fuse blocks are available in 1-, 2- and 3-pole configurations for Class J applications up to 400 amps, Class H(K) and Class R applications up to 60 amps. The Class J and Class R power distribution fuse block products also have a 200 kA withstand rating, which helps achieve a high panel assembly SCCR.

The optional covers enhance the overall safety of the panel assembly, with IP20 finger-safe ratings. The covers have a convenient lockout/tagout feature, compatible with a broad array of lock designs. Covers are also available with optional open fuse indication to reduce troubleshooting and maintenance time.

View PDF

Hoffman SYSPEND Aluminum HMI Enclosure

The SYSPEND Aluminum HMI enclosure is designed to accommodate modern touch-screen HMI devices and can be pendant- or pedestal-mounted. Extruded aluminum top and sides provide enhanced usability with internal mounting channels. The single-walled aluminum reduces the overall weight of the enclosure, eliminating strain during installation and use. The integrated side handles provide enhanced ergonomics. The SYSPEND Aluminum HMI enclosure's aesthetics are clean and modern and the life of the HMI system is extended due to increased heat dissipation.

View PDF

Hubbell Wiring Devices WaterTight Products

Hubbell's watertight products are ideal for withstanding harsh, wet environments like food and beverage, processing and outdoor construction. These watertight devices offer superior resistance to water ingress and an extremely durable construction.

Their Watertight Wiring Devices include UL-listed plugs and connectors from 15A/125V to 30A/480V, as well as receptacles and accessories

View PDF

Rockwell Automation Re-manufacturing Global Services

Rockwell Automation's re-manufacturing services go beyond other repair providers. View their video to see what goes into remanufacturing your Rockwell Automation or competitive product.

Contact Revere Electric for more information @ revereservices@revereelectric.com.

View PDF


Hoffman is excited to be the first to create and market Type 12 UL/cUL Listed Filter Fans for use with electrical enclosures! Underwriters Laboratories has created a new category that allows enclosure accessories like filter fans to now be certified as a UL/cUL Listed component. Hoffman's new filter fans are currently the first and only filter fans to be approved to have this new certification.

Having this new certification enables us to better serve our OEM and Panel Shop customers by saving them the time and money required to obtain it on their own, when their specific applications or projects require it.

View PDF

Hubbell Passive Infrared Wall Switch Sensors Now Featuring Dual Circuit Capabilities

Hubbell Dual Circuit Wall Switch Sensor is the perfect light switch replacement solution when controlling more than one load. It occupies the same space as a single gang wall switch with a depth of just over a one inch providing with one of the smallest form factors in the industry for its kind. This reduces installation costs and also provides the customer with flexibility of upgrading an existing system.

It features adjustable sensing sensitivity and independent timers settings. It is available with options for night light and neutral wire if required. It can also be wired as either bi-level or dual circuit configurations.Hubbell offers units in both occupancy and Vacancy only operation modes that help maximize energy savings.

View PDF

Rockwell Global SCCR Selection Tool

Rockwell Automation's Global SCCR Tool provides coordinated high fault branch circuit solutions for motor starters, soft-starters and component drives.

Ratings now provided for ArmorStart®distributed motor starters,SMC™ Flex, SMC™-3 and SMC™-50 soft starters, power distribution and terminal blocks.

Get access to the tool now!

NEMA Combination Starters Now Feature a 65 kA Short Circuit Rating

Allen Bradley's Bulletin 507 and 513 NEMA Combination Starters with molded case circuit breakers now feature a 65 kA short circuit rating, making them well-suited for applications such as:

  • Oil and gas refineries
  • On-shore and off-shore drilling
  • Mining
  • Power plants
  • Petrochemical processing

View PDF

Allen Bradley's Solid State Pressure Sensors

Capable of measuring pressure of liquid or gases, the new Allen-Bradley®Solid-State 836P Pressure Sensors are available in display and non-display models in rugged, compact housings with corrosion- resistant 316L solid-state sensor elements. Display models feature embedded IO-Link for enhanced functionality, data and diagnostics.

View PDF

Eaton Crouse Hinds CoSPEC 3D Drawing and Design Tool

Eaton aims to be a leading provider of information and resources to our customers.

That's why they're rolling out our CoSPEC online 3D Drawing Catalog, which offers the ability to select and view Eaton's Crouse-Hinds series products in 2D and 3D. Then, with a couple of clicks, you can download design content in one of nearly 100 different CAD, BIM, PDMS and graphics formats. File format outputs are native to the chosen software, which eliminates translation errors and speeds the integration of the content into your project.

With CoSPEC, you can:

  • Configureproducts to exact base catalog number/SKU.
  • Viewyour chosen product in 2D or 3D.
  • Download2D drawings or 3D models for integration into your design packages.

Learn About the Tool and create your User ID.

View PDF

Hubbell Advantage Series Switch-Rated IEC Pin & Sleeve

Hubbell's Advantage Series combines the advantages of their top performing 60A IEC pin & sleeve with the capabilities of a UL2682 switch-rated device. Hubbell's Pin & Sleeve connections have always been safe - that hasn't changed. The Advantage™series simply has more advantages.

More Flexibility - The Advantage™Series are the only Switch-Rated IEC Pin & Sleeve Devices in the market. By working with existing installed IEC 60309-2 pin and sleeve plug and inlet bases customers save both time and money.

More Switching Capabilities - The Advantage™Series are approved as a disconnecting means for both motor circuits and branch circuits. They carry a robust 100kA SCCR rating along with a 30 HP rating at 480V.

More Water Ingress Protection - The Advantage™ Series are designed for use in harsh environments. They are UL witnessed IP69K and UL Type 4X and 12 devices. They were engineered to offer superior protection against water and dust - even enduring high water flow or areas with excessive amounts of dust. The sleek, modern design makes them easy to keep clean in washdown applications. Product ratings are laser-marked into the device for permanent identification that won't wash off.

More Advantages - Visual verification of power to the device is provided with highly visible, long-lasting green LEDs on both sides.

An impact-resistant internal swing arm is fully shrouded, protecting it from any potential damage. The robust, durable housing is UV-stabilized, impact- and corrosion-resistant, and designed to withstand industrial environments.

Interested in learning more, give us a call or complete a Solutions Information form .

View PDF

Philips Instafit T8 LED Lamps

Upgrading to energy-saving lighting just got a whole lot easier. Philips InstantFit LED lamps fit seamlessly into your existing fluorescent fixtures, so you can switch to energy-efficient illumination just by swapping tubes. These ground-breaking lamps come in a range of shapes and sizes that include linear (2ft., 3ft., and 4 ft.), U-Bent, and 4-pin compact fluorescent lamps (G24q / GX24 bases), and 4-pin long compact fluorescent lamps (2G11 base). Furthermore, they utilize your existing ballast so no re-wiring is needed.

Philips InstantFit tubes are compatible with 80% of fluorescent ballasts in use today. What's more, they provide energy savings of up to 50% compared to fluorescent 32W T8 systems.

Providing a quick and convenient way to upgrade to LED, InstantFit is setting new standards in sustainable lighting.

Contact us today to learn more... Sustainability@revereelectric.com

View PDF

Littelfuse PGR-8800 Arc Flash Relay

The Littelfuse PGR-8800 can be used as part of an energy-reducing active arc-flash mitigation system to meet NEC 240.87 (B) (4). It is a UL and cUL Listed Arc-Flash Relay that will reliably detect developing Arc-Flash incidents without nuisance tripping.

The PGR-8800 looks for a combination of excess light and current. The phase-current-transformer inputs provide for current-constrained arc-flash protection. A programmable definite-time overcurrent function can be enabled. There is an optical sensor on the PGR-8800 and adjustable trip level to reduce the chance of nuisance tripping by setting a threshold for ambient light. Sensors, inputs, and connections are monitored to ensure fail-safe operation. A secondary solid-state trip circuit provides a redundant trip path. A USB port is used for configuration and access event logs and graphs.

Panduit IntraVUE Software

Ethernet networks are becoming a critical link between the Manufacturing and Automation Systems and the Business Systems. With the number of connected industrial devices expected to increase dramatically in the future, this creates a greater possibility of disruptions.

With so many connected devices to manage, detection, diagnosis and problem resolution have become a costly and time-consuming task. What's more, manually testing every endpoint to pinpoint connectivity failure is not practical or feasible.

IntraVUE, addresses the challenges unique to these industrial environments, providing awareness into all levels of devices and connectivity, and enabling operational field technicians to efficiently communicate with IT resources. IntraVUE also helps to speed both documentation and deployment, and provides advanced analytics to optimize ongoing performance.

Download Panduit's Case Study below and if you are interested in learning more, contact your Revere Account Manager for a LIVE Demo.

View PDF

Hubbell - USB Charger Receptacles and Outlets

Hubbell's USB Charger Duplex Receptacle provides both USB and electrical power in a standard single gang opening. Designed to provide maximum charging for portable electronics, the USB ports are capable of charging two tablets simultaneously.

The 4 Port Charger Outlet features a USB port door, which when open enables power. When closed, all power is switched off. This eliminates all current flow for a "zero" no-load draw. Buildings looking to provide 100% green efficiency in power delivery will maximize LEED and energy efficient design.

View PDF

Grace Engineered Products Easy Install Pass Thru

The R-3K is a Permanent Electrical Safety Device (PESD) that complements Grace Engineered Products existing line of SafeSide R-3W series voltage indicators used in the mechanical and electrical Lockout/Tagout (LOTO) process. The R-3K not only keeps people safe, it also makes workers lives simple with easy installation; meaning decreased downtime and increased productivity.

The R-3K is easy to install on any NEMA Type 4, 4X or 12 electrical cabinet door or on a cabinet flange with a 30mm standard knock-out next to a voltage indicator. No need for any additional wiring other than just passing three phase leads through the R-3K. With the R-3K and R-3W series voltage indicators, electricians can now perform "live-dead-live" test, as mandated by OSHA for voltages above 50 volts and as required by the NFPA 70E (2012 edition), Article 110.4(A)(5), with visual indicator and a NCVD pen.

View PDF

eWON Cosy

The eWON Cosy is an industrial remote access router that is designed to offer easy remote access, across the Internet, to machines and installations at customers or in the field. With eWON Cosy, OEMs and System Integrators can troubleshoot machines, debug the PLC program, upload projects, gain remote use of an HMI or an IP camera, without going on site, drastically reducing support costs.

The eWON Cosy lets an engineer establish a secure VPN connection from the machine to anywhere via Talk2M, eWON's cloud-based remote connectivity solution. The router seamlessly communicates on the local area network with the PLC and the HMI, and allows remote connection from anywhere with a simple laptop, tablet or smartphone. eWON Cosy and Talk2M make working across the Internet easy, so the user does not need to be an IT expert to take advantage of it.

Here are some benefits for the eWON Cosy product line:

  • No re-occurring costs
  • Eliminates downtime and travel expenses
  • Integrated Wifi, Cellular connectivity for the Cosy 131
  • Robust, secure, and reliable
  • Easy web access
  • A user friendly way to manage your eWON devices

View PDF

ControlLogix 5580 Controller

The ControlLogix 5580 Controller helps enable faster system performance, capacity, productivity and security to help meet the growing demands of smart machines and equipment for manufacturing. High-performance control with up to 45% more memory capacity and a 1 gigabit (Gb) embedded Ethernet port enables high-performance I/O and motion control helping to reduce the need for additional Ethernet modules. The ControlLogix 5580 controller with Studio 5000 software connects people and processes to enable the Connected Enterprise.

View PDF

Enclosure Modification Solutions

Ordering and receiving your modified standard enclosure has never been so easy. With our new eCAB Mod Center, Revere can create holes and cut-outs for almost any standard enclosure, to your precise specifications, on time and on budget.

From small junction boxes to the largest free-standing enclosures, our modification solution eliminates the labor intensive manual process of creating your own customized panels and modified enclosures.

We can quickly modify everything from one off panels to complex modifications with 100% automated, repeatable accuracy. Precisely guided by software that integrates seamlessly with standard industry CAD DXF files, our Mod Center automates all of the drilling, tapping, milling and processing steps and creates perfectly positioned holes and cutouts every time - no more measuring errors and costly delays!

Want to learn more? Contact us now!

View PDF

Bussmann Low Profile Compact Circuit Protector

We are pleased to introduce the Bussmann® series Low Profile Compact Circuit Protector (CCPLP), the industry's smallest UL 98 Listed fused disconnect switch.

We are pleased to introduce the Bussmann® series Low Profile Compact Circuit Protector (CCPLP), the industry's smallest UL 98 Listed fused disconnect switch.

The game-changing CCPLP can be panel-mounted in a variety of applications, and is available in 20A for Class G, 30A Class CC, IEC 10x38mm gG/aM up to 32A and UL midget versions, all in 1-, 2- and 3-pole versions.

This versatile fused disconnect switch is able to reject other class fuses while providing the flexibility to change ampacity within the fuse class, if needed.

With the industry's smallest fusible switch footprint, the CCPLP matches common low-profile, panel-mount circuit breakers, providing an easy, alternative solution with more than 10X the interrupting rating.

The CCPLP is designed to support higher energy efficiency and greater power density data center designs, and can also help easily achieve selective coordination.

View PDF

Philips CFI EvoGrid Recessed Architectural LED

The Philips Day-Brite / Philips CFI EvoGrid recessed architectural LED combines style and affordability so that you can create comfortable, energy-efficient spaces within reach of your budget. The attractive 2x2 and 2x4 configurations and three color temperatures complement any decor without distraction, thanks to a single lens enclosure and stylish, modern architectural aesthetics, yet are priced similarly to specification grade fluorescent luminaires. EvoGrid makes it easy to transition into dimmable LED technology, with high energy efficiency that can reduce payback periods; while the SpaceWise integrated wireless control option provides further energy savings that may qualify for additional rebate incentives.

View PDF

Grace Engineered Products Safeside® Voltage Test Station

Grace's new SafeSide® Voltage Test Station (VTS) is a revolutionary product that minimizes electrical worker's exposure to live voltage and the risk of an arc flash hazard. The VTS further simplifies the three step voltage test method and exceeds NFPA 70 E/CSA Z642 and OSHA standards if used in your Lock-out Tag-out (LOTO) procedure. This thru-door technology concept provides a combination of a voltage indicator and test points for actual voltage measurement in a single housing, eliminating guess work and verifying zero electrical energy from outside the enclosure. The entire VTS product offering follows Grace's core concept of customization, available in various NEMA and stainless steel housings to serve many industry needs.

View PDF

Encore Wire PullPro

After a year in design and testing, Encore believes the PullPro is now the best product in the market and we're ready to show you why. Budget, safety and agility take priority on any job site, so we developed a product that weighs less than 30lbs, requires no additional tools and fits into any small space for storage. The PullPro's case is manufactured from durable material that can withstand nearly any drop, but in the event you'd like to drop it from extreme heights, don't worry, PullPro's technology allows for a seamless wire pull with or without the case.

View PDF

Hoffman Global Free-Stand Stainless Steel Enclosures

The FS66S enclosure is designed to house large components such as motor starters, drives, contactors and PLC, as well as a wide range of other electrical and electronic equipment in harsh and corrosive environments. The enclosure's three-point latching and foam-in-place sealing provide industry-leading protection from dust, oil and water. Rated UL 4X and IP66, the FS66S enclosure is used extensively in vertical markets including Oil & Gas, Water/Wastewater, Petrochemicals and Power Generation. It offers a perfect solution to outdoor DCS applications.

Contact us today for more information.

View PDF

Rockwell Automation Visible Blade Disconnect Switch

End users can choose from a number of styles and options to meet their specific application needs, including non-fusible or fusible versions. The universal disconnect switches are unique in that they can be connected for rod or cable operation in the field. With the cable option, users also have the flexibility to mount the switch anywhere in the panel, regardless of location of the handle.

Panel builders can take advantage of enhanced safety for customers with the optional one piece back-of-hand cover designed to protect against the line and load sides of the switch. Snap-on auxiliary contacts provide status notification to the control system. The disconnect switches are also in compliance with NFPA 79-as the switch, operating mechanism and handle are connected, whether the panel door is open or closed.

View PDF

Crouse Hinds VSpring Telescoping Light Pole

The new, patent-pending V-Spring telescoping light pole from Eaton's Crouse-Hinds business increases safety and decreases labor costs associated with lighting installation and routine maintenance. Its innovative design allows for all work to safely take place on the platform or walkway, eliminating the need for portable ladders and fall protection equipment.

View PDF

Philips EvoKit LED

Philips EvoKit LED Retrofit Kit is an energy efficient LED alternative to traditional linear fluorescent troffers. Not only does it offer energy savings , it also helps reduce maintenance costs due to its long lifetime. Simple construction helps decrease the installation time meaning you can have an LED solution in your ceiling in just minutes.

View PDF


Copyright © 2019 Revere Electric. All Rights Reserved